Mobile & Gadgets
3.5 mm plug
Volume Control Present
1 Year Warranty
Padang Serai, 09400 Kedah
YAMAHA WIRELESS MICROPHONE SYSTEM INSTRUCTION
Connect the unit with the mains.
Connect the receiver and the input socket of Hi-fi with cords
Turn on the power of the Hi-fi. Adjust to a suitable volume, press the power switch on the receiver, once the red light on the receiver is lit. It means your receiver works normally.
Remove the case microphone, install a 9v battery. Then put the power switch on the tail end of the microphone to ON position. After tightening the case firmly. The power light will light up. The colour of A microphone is indicated red, and B is green, which is same as the receiver. This shows that the system is working morning normally. Adjust a suitable volume.
Microphone must not face the loud speaker, to avoid causing a sharp sound.
After using, turn the switch to OFF position to save battery. Turn off the power of the receiver, and put the cord out of power
Frequency range : VHF /FM (109-120MHz)
Frequency Response : 100Hz - 10000Hz(+3dB)
Audio Distortion :Less than 1%
Dynamic Range : 80dB
S/N Ratio : better than 80dB
Operating Temperature : 0 C - 45 C
Service areas : 10
Tunachagua tunavyovipenda na tunakutumia bidhaa moto moto kila wiki!!